See also: Test Type Working Principles

or for a few 'supported audiometers':


Audiqueen can connect to the most commonly used audiometers, allowing you to use the proprietary software that comes with the audiometer and extract the measured audiogram automatically from the instrument. Please refer to the list of supported instruments.


Audiqueen opening a third-party application (e.g. Interacoustics Equinox Suite) to connect with the audiometer.



Use Format to configure the connection with the audiometer.

Figure showing how to connect Audiqueen with an audiometer. 
Use the Audiometry Format button  to select the audiometer and the Configure button to set the detailed configuration.


Figure showing how to connect Audiqueen with an audiometer. Use the Audiometry Format button  to select the audiometer and the Configure button to set the detailed configuration.


Then press ‘Configure’. A configuration Screen appears for the selected instrument connection.

Depending on which instrument you selected, different parameters are available. Each instrument connector comes with default values for these parameters. However, it might happen that the instrument or its Software Suite is configured in a way that demands these parameters to be tweaked.

Each parameter and its behaviour are described at the bottom of the screen. For details on how to configure Audiqueen for specific instruments, please refer to the separate Instrument Connector Manuals which are available on the Otoconsult FTP server.

See also: Audiometer Connectors

See also: Audiometry Self-test